Offshore

The OPITO-approved Further Offshore Emergency Training programme with Compressed Air Emergency Breathing System (CA-EBS) and Emergency Breathing System (EBS) is a 1-day course which must be undertaken by individuals who have a valid BOSIET, TBOSIET, FOET or TFOET certificate. The FOET certificate re-validates a delegate’s offshore emergency training for a further 4 years.

Where delegates successfully meet the Learning Outcomes of the course, they will be issued with an OPITO Approved Certificates CAEBS and EBS which is valid for 4 years.

OPITO

• Helicopter Safety and Escape
• Firefighting and Self-rescue
• Emergency First Aid

The FOET (with CA-EBS) and (EBS) is open to persons who have a valid (in-date) OPITO-approved BOSIET (with CA-EBS) and BOSIET (with EBS), TBOSIET, FOET (with CA-EBS) and FOET (with EBS) or TFOET certificate.

OPITO-approved training centres are required to ensure that prior to participating in in-water CA-EBS practical exercises the learner: Please see prerequisites below

a) Possesses a valid, unexpired Oil and Gas UK (OGUK) offshore medical certificate confirming the learner’s fitness for offshore work* OR possesses a valid, unexpired offshore medical certificate issued by a body outside of the UK which is recognised as equivalent to the OGUK medical certificate of fitness for offshore work* OR possesses a valid, unexpired, medical certificate of fitness to work at sea*, AND

b) Possesses a certificate of fitness to undertake shallow water CA-EBS training issued by a registered OGUK examining doctor*, OR, where the medical fitness certificate for work at sea includes a restriction or is subject to conditions, possesses a statement from an appropriately registered practitioner that the restriction or condition does not result from a respiratory or ENT condition and there is no absolute contraindication to the shallow water learner’s participation in the training*, AND

c) On the date on which the learner is to undertake shallow water CA-EBS training, and prior to entering the water in which the training takes place, the learner gives to the OPITO-approved Centre a statement, that to the best of the learner’s knowledge and belief, the learner has no (current or past) medical condition which makes the learner unfit to participate in the training. Learners must not participate in Additional CA-EBS Training (In-Water) practical exercises if they are unable to meet the requirements of a) b) and c) above.

4 years

Anyone continuing employment offshore

Price On Request

This training is intended to meet the requirements set out in The Merchant Shipping (Entry into Dangerous Spaces) Regulations 1988 (SI 1988 No. 1638) (the Regulations), IMO Resolution A.864 (20) Recommendations for entering enclosed spaces aboard ships (adopted on 27th November 1997) and the Code of Safe Working Practices for Merchant Seamen (COSWP).

Course Outcomes:

• Recognise potential dangerous enclosed spaces aboard a vessel
• Complete a typical enclosed space entry Permit to Work
• Carry out the safe testing of an atmosphere prior to enclosed space entry using typical industry test equipment, including knowledge of it’s maintenance and testing/calibration requirements.
• Carry out a safe enclosed space entry
• Carry out a self rescue from an enclosed space
• Carry out safety attendant role

No.

£195 excl. VAT

Stream Marine Training provides approved training packages for those interested in a career within the renewables industry. We offer a Basic Safety Training week for those beginning their careers in this sector. If you are already working in the offshore/onshore industry, we can offer training to advance in your career. Our Basic Safety Training course is made up of:

Day 1 & 2 Monday & Tuesday - Working at Height & Manual Handling Combined

Day 3 Wednesday - Sea Survival (for offshore personnel)

Day 4 Thursday - First Aid

Day 5 Friday - Fire Fighting

To book these courses individually, please call our bookings office on 0141 212 8777 to arrange a suitable date.

The Global Wind Organisation requires certificates to be updated every 2 years, so refresher training courses are also offered below, in line with the certification body regulations.  To book refresher training at SMT, please also call our bookings office on 0141 212 8777 to arrange a suitable date.

• First Aid
• Manual Handling
• Fire Awareness
• Working at Heights
• Sea Survival

2 years

Persons preparing for a career in the offshore renewables industry

• The Delegates shall also have a personal Delegate profile in WINDA and provide their own WINDA ID prior to completing the BST training.

• GWO BST Fire Awareness
• GWO BST Manual Handling
• GWO BST Working at Height
• GWO BST Sea Survival
• GWO BST First aid

£462.50 excl. VAT

The approved GWO Basic Safety Training Refresher (BSTR) refreshes, reviews and builds on Delegates existing skills and tools obtained during BST courses, which include Fire Awareness, First Aid, Working at Heights and Manual Handling. To enable Delegates to work in the offshore environment, an additional GWO Sea Survival training shall be completed.

A participant is only allowed to attend a refresher course in the specific training module prior to the date of expiry on the current certificate or training records. If a certificate or training record is expired, the participant must attend the full Basic Safety Module(s) Training(s) to obtain a new training record.

• GWO BSTR Manual Handling Refresher
• GWO BSTR Fire Awareness Refresher
• GWO BSTR Sea Survival Refresher
• GWO BSTR Working at Height Refresher
• GWO BSTR First Aid Refresher

• First Aid
• Manual Handling
• Working at Height
• Sea Survival
• Fire Awareness

• All personnel participating in Refresher Training shall be medically fit and capable of fully participating.
• Delegates shall possess valid BST/ BSTR certificates or training records in WINDA for the all 5 safety training modules prior to attending BSTR training.
• The Delegates shall also have a personal Delegate profile in WINDA and provide their own WINDA ID prior to completing the BST training.

2 years

People continuing a career in the offshore renewables industry

£380 excl. VAT

The aim of this course is to give the delegates the basic knowledge and skills through theoretical and practical training.
Delegates should be able to prevent fires, make appropriate judgements when evaluating a fire, manage evacuation of personnel and ensure all are safely accounted for in the event of an unmanageable fire. If the incident is judged to be safe, the delegates should be able to efficiently extinguish an initial fire by using basic hand held firefighting equipment.

GWO Fire Awareness (FA)

• The Delegates are able to demonstrate knowledge of the development and spread of fire
• The Delegates are able to demonstrate knowledge of the causes of fires in wind turbines and the related dangers
• The Delegates are able to identify any sign of a fire in a wind turbine environment
• The Delegates are able to demonstrate knowledge of the contingency plans in a wind turbine environment, including smoke detection and emergency escape procedures
• The Delegates are able to demonstrate correct actions for discovering a fire including correct use and fire extinguishing using firefighting equipment in a WTG 

2 years

Persons preparing for a career in the offshore renewables industry

• All personnel participating in Refresher Training shall be medically fit and capable of fully participating.
• The Delegates shall also have a personal Delegate profile in WINDA and provide their own WINDA ID prior to completing the BST training.

GWO

£50 excl. VAT

The aim of this course is to give the delegates the basic knowledge and skills through theoretical and practical training.
Delegates should be able to prevent fires, make appropriate judgements when evaluating a fire, manage evacuation of personnel and ensure all are safely accounted for in the event of an unmanageable fire. If the incident is judged to be safe, the delegates should be able to efficiently extinguish an initial fire by using basic hand held firefighting equipment.

A participant is only allowed to attend a refresher course in the specific training module prior to the date of expiry on the current certificate or training records. If a certificate or training record is expired, the participant must attend the full Basic Safety Module(s) Training(s) to obtain a new training record.

GWO Fire Awareness Refresher (FAWR)

• The Delegates are able to demonstrate knowledge of the development and spread of fire
• The Delegates are able to demonstrate knowledge of the causes of fires in wind turbines and the related dangers
• The Delegates are able to identify any sign of a fire in a wind turbine environment
• The Delegates are able to demonstrate knowledge of the contingency plans in a wind turbine environment, including smoke detection and emergency escape procedures
• The Delegates are able to demonstrate correct actions for discovering a fire including correct use and fire extinguishing using firefighting equipment in a WTG 

• All personnel participating in Refresher Training shall be medically fit and capable of fully participating.
• Delegates shall possess valid BST/ BSTR certificates or training records in WINDA for the Fire Awareness prior to attending BSTR training.
• The Delegates shall also have a personal Delegate profile in WINDA and provide their own WINDA ID prior to completing the BST training.

2 Years

Persons continuing a career in the offshore wind and renewables industry

GWO

£50 excl. VAT

The aim of this BST Module is to enable delegates to administer safe and effective First Aid in the wind turbine industry/ WTG environment, in accordance with GWO First Aid training through theoretical and practical training.
Furthermore, this training will enable the delegate to perform cardiopulmonary resuscitation (CPR) and use an automated external defibrillator (AED).

GWO BST First Aid

• The Delegates are able to demonstrate understanding of the importance of carrying out First Aid in a safe and sound manner, in accordance with the legislative requirements of their geographic location and according to the International Liaison Committee on Resuscitation (ILCOR) hereunder the European Resuscitation Council (ERC) and American Heart Association (AHA) guidelines
• The Delegates are able to identify and explain normal function, normal signs and symptoms of injuries and illness related to the human body
• The Delegates are able to demonstrate understanding and correct order of management in an emergency situation in a Wind Turbine Generator (WTG) environment
• The Delegates are able to demonstrate correct use of lifesaving First Aid using the Primary Survey “C” -A - B – C including the use of an Automatic External Defibrillator (AED)
• The Delegates are able to demonstrate correct use of the Secondary Survey
• The Delegates are able to demonstrate correct use of Primary and Secondary Survey including the use of First Aid equipment in a First Aid scenario 

2 years

Persons preparing for a career in the offshore renewables industry.

• All personnel participating in Refresher Training shall be medically fit and capable of fully participating.
• The Delegates shall also have a personal Delegate profile in WINDA and provide their own WINDA ID prior to completing the BST training.

£97.50 excl. VAT

The aim of this BSTR First Aid Module is to review and build on previously gained knowledge and skills from BST First Aid through theoretical and practical training so that Delegates can administer safe and effective First Aid, perform cardiopulmonary resuscitation (CPR) and use an automated external defibrillator (AED) in the wind industry / WTG environment.

A participant is only allowed to attend a refresher course in the specific training module prior to the date of expiry on the current certificate or training records. If a certificate or training record is expired, the participant must attend the full Basic Safety Module(s) Training(s) to obtain a new training record.

• All personnel participating in Refresher Training shall be medically fit and capable of fully participating.
• Delegates shall possess valid BST/ BSTR certificates or training records in WINDA for First Aid prior to attending BSTR training.
• The Delegates shall also have a personal Delegate profile in WINDA and provide their own WINDA ID prior to completing the BST training.

2 years

People continuing a career in the offshore wind and Renewables industry

GWO BSTR First Aid Refresher

• Delegates are able to demonstrate understanding of the importance of safely and correctly carrying out First Aid in accordance with the legislative requirements of their geographic location and according to the International Liaison Committee on Resuscitation (ILCOR) e.g. European Resuscitation Council (ERC) and American Heart Association (AHA) guidelines 

• Delegates are able to identify and explain normal function, normal signs and symptoms of injuries and illness related to the human body 

• Delegates are able to demonstrate understanding and correct order of management in emergency situations in a wind turbine work environment 

• Delegates are able to demonstrate correct use of lifesaving First Aid using the Primary and Secondary Survey (“C”-A-B-C-D-E) 

• Delegates are able to demonstrate correct use of an Automatic External Defibrillator (AED) 

• Delegates are able to demonstrate correct use of First Aid equipment in First Aid scenarios 

£70 excl. VAT

The aim of this Module is to encourage positive Manual Handling and ergonomic behaviour, encourage delegates to consider alternatives to manual handling through planning and to train delegates ability to perform Manual Handling tasks in a safe manner in the wind turbine industry/environment.

GWO BST Manual Handling

• The Delegates are able to demonstrate a problem-solving approach to Manual Handling in a wind turbine environment
• The Delegates are able to demonstrate Manual Handling risk reduction techniques
• The Delegates are able to identify aspects of their job tasks that could increase their risk of developing muscular/ skeletal injuries
• The Delegates are able to demonstrate understanding of the importance of carrying out work duties in a safe and sound manner in accordance with the legislative requirements of their geographic work location
• The Delegates are able to demonstrate understanding of safe practises of Manual Handling, including the correct handling of equipment
• The Delegates are able to identify signs and symptoms of injuries related to poor Manual Handling techniques and have knowledge of reporting methods 

2 years

Persons preparing for work in the offshore renewables industry.

• All personnel participating in Refresher Training shall be medically fit and capable of fully participating.
• The Delegates shall also have a personal Delegate profile in WINDA and provide their own WINDA ID prior to completing the BST training.

£40 excl. VAT

The aim of this Module is to encourage positive Manual Handling and ergonomic behaviour, encourage delegates to consider alternatives to manual handling through planning and to train delegates ability to perform Manual Handling tasks in a safe manner in the wind turbine industry/environment.

A participant is only allowed to attend a refresher course in the specific training module prior to the date of expiry on the current certificate or training records. If a certificate or training record is expired, the participant must attend the full Basic Safety Module(s) Training(s) to obtain a new training record.

GWO BSTR Manual Handling Refresher

• The Delegates are able to demonstrate a problem-solving approach to Manual Handling in a wind turbine environment
• The Delegates are able to demonstrate Manual Handling risk reduction techniques
• The Delegates are able to identify aspects of their job tasks that could increase their risk of developing muscular/ skeletal injuries
• The Delegates are able to demonstrate understanding of the importance of carrying out work duties in a safe and sound manner in accordance with the legislative requirements of their geographic work location
• The Delegates are able to demonstrate understanding of safe practises of Manual Handling, including the correct handling of equipment
• The Delegates are able to identify signs and symptoms of injuries related to poor Manual Handling techniques and have knowledge of reporting methods 

• All personnel participating in Refresher Training shall be medically fit and capable of fully participating.
• The Delegates shall also have a personal Delegate profile in WINDA and provide their own WINDA ID prior to completing the BST training.
• Valid GWO BST/BSTR Manual Handling certificate or Winda record.

2 years

Persons continuing a career in the offshore wind or renewables industry

£76 excl. VAT

The aims of this BST Sea Survival course are, by theoretical and practical training to give the participants the basic knowledge and skills to act safely and take the correct preventive actions in all aspects of offshore operations from shore to installation vessel or WTG and vice versa, both during normal operation and in an emergency in an offshore wind energy environment.

GWO BST Sea Survival

• The Delegates can demonstrate the needed awareness of the site organisation and relevant legislation to ensure that the candidates are aware of the roles, responsibilities and rules that apply to offshore wind farms.
• The Delegates can demonstrate the needed knowledge to understand the importance of correct clothing and conduct in an offshore wind farm environment. Further to enable skills of detecting and treating stages of cold shock, hypothermia and drowning related to exposures to the human body in an offshore wind environment.
• The Delegates can demonstrate the needed knowledge and skills to recognise the advantages and limitations of personal LSA and PPE and usage in a correct and safe manner.
• The Delegates can demonstrate the needed knowledge related to GMDSS (Global Maritime Distress and Safety Systems) and SAR (Search and Rescue).
• The Delegates can demonstrate the needed skills individually and collective to enhance the chance of survival in an emergency at sea.
• The Delegates can demonstrate the needed knowledge to recognise the hazards and risks of transfer and take the correct preventive measures into account by following procedures and use the available LSA and PPE in a correct and safe manner.
• The Delegates can demonstrate the needed knowledge to ensure safe conduct on installations, vessels and WTG´s during normal operations and in case of emergencies and evacuation.
• The Delegates can demonstrate the needed skills to conduct safe transfer of themselves and equipment between dock and vessel and WTG and vessel. Furthermore, to give the Delegates skills to assist in MOB situations.
• The Delegates can reflect on and process their learning outcome and key takeaways from the module, aiming to achieve a high learning transfer from the module to his/her way of work. 

Persons preparing for a career in the offshore renewables industry

2 years

• All personnel participating in Refresher Training shall be medically fit and capable of fully participating.
• The Delegates shall also have a personal Delegate profile in WINDA and provide their own WINDA ID prior to completing the BST training.

£150 excl. VAT

The aims of this BST Sea Survival course are, by theoretical and practical training to give the participants the basic knowledge and skills to act safely and take the correct preventive actions in all aspects of offshore operations from shore to installation vessel or WTG and vice versa, both during normal operation and in an emergency in an offshore wind energy environment.

A participant is only allowed to attend a refresher course in the specific training module prior to the date of expiry on the current certificate or training records. If a certificate or training record is expired, the participant must attend the full Basic Safety Module(s) Training(s) to obtain a new training record.

GWO BSTR Sea Survival Refresher

• The Delegates can demonstrate the needed awareness of the site organisation and relevant legislation to ensure that the candidates are aware of the roles, responsibilities and rules that apply to offshore wind farms.
• The Delegates can demonstrate the needed knowledge to understand the importance of correct clothing and conduct in an offshore wind farm environment. Further to enable skills of detecting and treating stages of cold shock, hypothermia and drowning related to exposures to the human body in an offshore wind environment.
• The Delegates can demonstrate the needed knowledge and skills to recognise the advantages and limitations of personal LSA and PPE and usage in a correct and safe manner.
• The Delegates can demonstrate the needed knowledge related to GMDSS (Global Maritime Distress and Safety Systems) and SAR (Search and Rescue).
• The Delegates can demonstrate the needed skills individually and collective to enhance the chance of survival in an emergency at sea.
• The Delegates can demonstrate the needed knowledge to recognise the hazards and risks of transfer and take the correct preventive measures into account by following procedures and use the available LSA and PPE in a correct and safe manner.
• The Delegates can demonstrate the needed knowledge to ensure safe conduct on installations, vessels and WTG´s during normal operations and in case of emergencies and evacuation.
• The Delegates can demonstrate the needed skills to conduct safe transfer of themselves and equipment between dock and vessel and WTG and vessel. Furthermore, to give the Delegates skills to assist in MOB situations.
• The Delegates can reflect on and process their learning outcome and key takeaways from the module, aiming to achieve a high learning transfer from the module to his/her way of work. 

• All personnel participating in Refresher Training shall be medically fit and capable of fully participating.
• The Delegates shall also have a personal Delegate profile in WINDA and provide their own WINDA ID prior to completing the BST training.
• GWO BST or BSTR certificate or WINDA training Record

2 years

Personnel continuing a career in the offshore wind and renewables industry

£150 excl. VAT

The aim of this module is to qualify the participants, through theoretical and practical training, to use basic personal protective equipment and perform safe work at heights and safe and comprehensive basic rescue from heights in a remote wind turbine environment.

GWO BST Working at Height

• The Delegates are able to demonstrate knowledge of hazards and risks associated with working at height specific to a wind turbine generator (WTG)
• The Delegates are able to demonstrate understanding of current national and regional legislation regarding working at heights
• The Delegates are able to demonstrate correct identification of PPE, including identification of Global and regional standard markings e.g. harness, hard hat, lanyards, etc.
• The Delegates are able to demonstrate the knowledge and skills to correctly perform pre-use inspection, service, store and correctly fit relevant PPE, e.g. harness, fall arrest lanyards, guided type fall arrest lanyards and work positioning lanyards
• The Delegates are able to demonstrate correct use of the relevant PPE, e.g. harnesses fall arrest lanyards, guided type fall arresters and work positioning lanyards. This includes correct identification of anchor points and correct conduct on ladder
• The Delegates are able to demonstrate correct use of evacuation devices
• The Delegates are able to demonstrate how to approach rescue situations in WTGs and use rescue equipment efficiently 

2 years

Persons preparing for a career in the offshore renewables industry

• All personnel participating in Refresher Training shall be medically fit and capable of fully participating.
• The Delegates shall also have a personal Delegate profile in WINDA and provide their own WINDA ID prior to completing the BST training.

£170 excl. VAT

The aim of this module is to qualify the delegates, through theoretical and practical training, to use basic personal protective equipment and perform safe work at heights and safe and comprehensive basic rescue from heights. Furthermore, to encourage positive manual handling and ergonomic behaviour, encourage delegates to consider alternatives to manual handling through planning and to train delegates ability to perform Manual Handling tasks in a safe manner in the wind turbine industry/environment.

• GWO BST Manual Handling
• GWO BST Working at Height

• The Delegates are able to demonstrate knowledge of hazards and risks associated with working at height specific to a wind turbine generator (WTG)
• The Delegates are able to demonstrate understanding of current national and regional legislation regarding Working at Heights
• The Delegates are able to demonstrate correct identification of PPE, including identification of European/Global standard markings e.g. harness, hard hat, lanyards, etc.
• The Delegates are able to demonstrate the knowledge and skills to correctly perform pre-use inspection, service, store and correctly fit relevant PPE, e.g. harness, fall arrest lanyards, guided type fall arrest devices and work positioning lanyards
• The Delegates are able to demonstrate correct use of the relevant PPE, e.g. harnesses fall arrest lanyards, guided type fall arresters and work positioning lanyards. This includes correct identification of anchor points and correct conduct on ladder
• The Delegates are able to demonstrate correct use of evacuation devices
• The Delegates are able to demonstrate how to approach rescue situations in WTGs and use rescue equipment efficiently
• The Delegates are able to demonstrate a problem-solving approach to Manual Handling in a wind turbine environment
• The Delegates are able to demonstrate Manual Handling risk reduction techniques 
• The Delegates are able to identify aspects of their job tasks that could increase their risk of developing muscular/ skeletal injuries
• The Delegates are able to demonstrate understanding of the importance of carrying out work duties in a safe and sound manner in accordance with the legislative requirements of their geographic work location
• The Delegates are able to demonstrate understanding of safe practices of Manual Handling, including the correct handling of equipment
• The Delegates are able to identify signs and symptoms of injuries related to poor Manual Handling techniques and have knowledge of reporting methods 

2 years

Persons preparing to work in the offshore renewables industry

• All personnel participating in Refresher Training shall be medically fit and capable of fully participating.
• The Delegates shall also have a personal Delegate profile in WINDA and provide their own WINDA ID prior to completing the BST training.

£202.50 excl. VAT

The aim of this module is to review and build on previously gained knowledge and skills through theoretical and practical training so that delegates can use basic personal protective equipment and perform safe work at heights and safe and comprehensive basic rescue from heights. Furthermore, to encourage positive manual handling and ergonomic behaviour, encourage delegates to consider alternatives to manual handling through planning and to train delegates ability to perform Manual Handling tasks in a safe manner in the wind turbine industry/environment.

A participant is only allowed to attend a refresher course in the specific training module prior to the date of expiry on the current certificate or training records. If a certificate or training record is expired, the participant must attend the full Basic Safety Module(s) Training(s) to obtain a new training record.

• GWO BSTR Working at Height Refresher
• GWO BSTR Manual Handling Refresher

• Delegates are able to demonstrate knowledge of hazards and risks associated with Working at Heights in a WTG.

• Delegates are able to demonstrate correct identification of PPE, including identification of European / Global Standard markings on harness, hard hats, lanyards and other PPE. 

• Delegates are able to demonstrate the knowledge of and skills to correctly pre-use inspect, service, store and correct fitting of harnesses, fall arrest lanyards, work positioning lanyards and other PPE. 

• Delegates are able to demonstrate correct use of the relevant PPE, e.g. harnesses, fall arrest lanyards, guided type fall arresters and work positioning lanyards. These include correct identification of anchor points and correct ladder conduct. 

• Delegates are able to demonstrate correct use of evacuation devices. 

• Delegates are able to demonstrate how to approach rescue situations in WTGs and use rescue equipment efficiently 

• The Delegates are able to demonstrate understanding of the importance of carrying out work duties in a safe and sound manner in accordance with the legislative requirements of their geographic work location 

• Delegates are able to identify aspects of their job tasks that could increase their risk of developing muscular/ skeletal injuries 

• The Delegates are able to demonstrate understanding of safe practices of Manual Handling, including the correct handling of equipment 

• The Delegates are able to identify signs and symptoms of injuries related to poor Manual Handling techniques and have knowledge of reporting methods 

• The Delegates are able to demonstrate a problem-solving approach to Manual Handling in a wind turbine environment 

• The Delegates are able to demonstrate Manual Handling risk reduction techniques 

2 years

People continuing a career in the offshore wind and renewables industry

• All personnel participating in Refresher Training shall be medically fit and capable of fully participating.

• Furthermore, Delegates shall possess valid BST/ BSTR certificates or training records in WINDA for Working at height and Manual Handling prior to attending BSTR training.

• The Delegates shall also have a personal Delegate profile in WINDA and provide their own WINDA ID prior to completing the BST training.

£220 excl. VAT

The aim of this BSTR Working at Heights Module is to review and build on previously gained knowledge and skills through theoretical and practical training so that Delegates can use basic personal protective equipment and perform safe work at heights and safe and comprehensive basic rescue from heights in the wind turbine industry/ WTG environment.

A participant is only allowed to attend a refresher course in the specific training module prior to the date of expiry on the current certificate or training records. If a certificate or training record is expired, the participant must attend the full Basic Safety Module(s) Training(s) to obtain a new training record.

GWO BSTR Working at Height Refresher

• Delegates are able to demonstrate knowledge of hazards and risks associated with working at heights in a WTG. 

• Delegates are able to demonstrate correct identification of PPE, including identification of European/ Global Standard markings on harness, hard hats, lanyards and other PPE. 

• Delegates are able to demonstrate the knowledge of and skills to correctly pre-use inspect, service, store and correct fitting of harnesses, fall arrest lanyards, work positioning lanyards and other PPE. 

• Delegates are able to demonstrate correct use of the relevant PPE, e.g. harnesses, fall arrest lanyards, guided type fall arresters and work positioning lanyards. These include correct identification of anchor points and correct ladder conduct. 

• Delegates are able to demonstrate correct use of evacuation devices. 

• Delegates are able to demonstrate how to approach rescue situations in WTGs and use rescue equipment efficiently. 

• All personnel participating in Refresher Training shall be medically fit and capable of fully participating.

• Delegates shall possess valid BST/ BSTR certificates or training records in WINDA for the Working at Height prior to attending BSTR training.

• The Delegates shall also have a personal Delegate profile in WINDA and provide their own WINDA ID prior to completing the BST training.

2 years

People continuing a career in the offshore wind or renewables industry.

£170 excl. VAT

Successful candidates will be awarded with the MCA Approved Engine Course 1 (AEC1) certificate, after a short exam.  

Writing material and overalls. 

£950 excl. VAT

Successful candidates will be awarded with the MCA Approved Engine Course 2 (AEC2) certificate, after a short exam. 

You must bring a pair of overalls and suitable footwear. It may be beneficial to bring a laptop, in order to access some information given on a memory stick, however this is not essential. 

No.

£950 excl. VAT

We are currently running MCA Small Workboat Stability - Webinar if you would like to take this course on-line via Zoom platform.

Course outcomes :

1. General terms in use
2. General Principles of Transverse Stability: –
3. Adding, removing and shifting weights: –
4. The Stability Booklet
5. Stiff and tender vessels
6. Use of cranes and shift of CoG
7. Free Surface Effect
8. Critical KG calculations (Transverse Stability)
9. Inclining Test
10. Deck edge Immersion
11. Catamaran stability
12. Risks associated with Tug and Tow
13. Risks associated with deck cargoes
14. Wind & Ice accretion Effects.

Successful candidates will be awarded with the MCA Stability for Workboats  certificate, after a short exam.

No.

No.

£225 excl. VAT

Course outcomes :

1. General terms in use
2. General Principles of Transverse Stability: –
3. Adding, removing and shifting weights: –
4. The Stability Booklet
5. Stiff and tender vessels
6. Use of cranes and shift of CoG
7. Free Surface Effect
8. Critical KG calculations (Transverse Stability)
9. Inclining Test
10. Deck edge Immersion
11. Catamaran stability
12. Risks associated with Tug and Tow
13. Risks associated with deck cargoes
14. Wind & Ice accretion Effects.

Successful candidates will be awarded with the MCA Stability for Workboats  certificate, after a short exam.

No.

No.

£225 excl. VAT